substitution failure of nss-certs

Done

Details

6 participants

Arun Isaac
Ben Sturmfels
Bengt Richter
Josh Holland
Ludovic Courtès
Tobias Geerinckx-Rice

Owner: unassigned

Submitted by: Josh Holland

Severity: normal

Merged with

37688

Debbugs page

Josh Holland wrote on 8 Oct 2019 07:18

Recipients:(name . bug-guix)(address . bug-guix@gnu.org)

Message-ID:87a7abwcav.fsf@inv.alid.pw

After the core-updates merge today, I did the following, and it gave an

error message (I tried a couple of times, with the same result):

$ guix pull && guix package -m ~/guix-packages.scm -u .

# ... snip ...

downloading from https://ci.guix.gnu.org/nar/gzip/532l4zja85y9c69i0l0bwnsxx98gpzdw-nss-certs-3.45...

nss-certs-3.45 148KiB 937KiB/s 00:00 [# ] 10.8%Backtrace:

gzip: stdout: Broken pipe

3 (apply-smob/1 #<catch-closure 2146640>)

In ice-9/boot-9.scm:

705:2 2 (call-with-prompt _ _ #<procedure default-prompt-handle?>)

In ice-9/eval.scm:

619:8 1 (_ #(#(#<directory (guile-user) 21c9140>)))

In guix/ui.scm:

1734:12 0 (run-guix-command _ . _)

guix/ui.scm:1734:12: In procedure run-guix-command:

Throw to key `encoding-error' with args `("scm_to_stringn" "cannot convert wide string to output locale" 84 #f #f)'.

nss-certs-3.45 148KiB 1.3MiB/s 00:00 [##################] 100.0%substitution of /gnu/store/532l4zja85y9c69i0l0bwnsxx98gpzdw-nss-certs-3.45 failed

killing process 645584

guix package: error: some substitutes for the outputs of derivation `/gnu/store/gvckkl62hkn74wcyw9x1wd0bkjf7c6y5-nss-certs-3.45.drv' failed (usually happens due to networking issues); try `--fallback' to build derivation from source

I then did the same, but added the suggested `--fallback` option onto

the end:

$ guix package -m ~/guix-packages.scm -u . --fallback

# snip massive list of "the following derivations will be built"

downloading from https://ci.guix.gnu.org/nar/gzip/532l4zja85y9c69i0l0bwnsxx98gpzdw-nss-certs-3.45...

nss-certs-3.45 148KiB 36.0MiB/s 00:00 [# ] 10.8%Backtrace:

gzip: stdout: Broken pipe

3 (apply-smob/1 #<catch-closure 1212640>)

In ice-9/boot-9.scm:

705:2 2 (call-with-prompt _ _ #<procedure default-prompt-handle?>)

In ice-9/eval.scm:

619:8 1 (_ #(#(#<directory (guile-user) 1295140>)))

nss-certs-3.45 148KiB 12.5MiB/s 00:00 [##################] 100.0%In guix/ui.scm:

1734:12 0 (run-guix-command _ . _)

guix/ui.scm:1734:12: In procedure run-guix-command:

Throw to key `encoding-error' with args `("scm_to_stringn" "cannot convert wide string to output locale" 84 #f #f)'.

substitution of /gnu/store/532l4zja85y9c69i0l0bwnsxx98gpzdw-nss-certs-3.45 failed

The command did then complete successfully, I assume building nss-certs

locally instead, though I can't see any further references to it in the

output.

I'm currently trying the same thing on my other computer.

Josh Holland

Tobias Geerinckx-Rice wrote on 10 Oct 2019 07:03

(no subject)

Recipients:(name . GNU bug tracker automated control server)(address . control@debbugs.gnu.org)

Message-ID:87zhi88zpj.fsf@nckx

merge 37662 37688

Ludovic Courtès wrote on 10 Oct 2019 07:31

Re: bug#37662: substitution failure of nss-certs

Recipients:(name . Josh Holland)(address . josh@inv.alid.pw)(address . 37662@debbugs.gnu.org)

Message-ID:877e5cy8np.fsf@gnu.org

Hi Josh,

Josh Holland <josh@inv.alid.pw> skribis:

Toggle quote (20 lines)> After the core-updates merge today, I did the following, and it gave an
> error message (I tried a couple of times, with the same result):
>
> $ guix pull && guix package -m ~/guix-packages.scm -u .
> # ... snip ...
> downloading from https://ci.guix.gnu.org/nar/gzip/532l4zja85y9c69i0l0bwnsxx98gpzdw-nss-certs-3.45...
>  nss-certs-3.45  148KiB                                                                                                                              937KiB/s 00:00 [#                 ]  10.8%Backtrace:
>
> gzip: stdout: Broken pipe
>            3 (apply-smob/1 #<catch-closure 2146640>)
> In ice-9/boot-9.scm:
>     705:2  2 (call-with-prompt _ _ #<procedure default-prompt-handle?>)
> In ice-9/eval.scm:
>     619:8  1 (_ #(#(#<directory (guile-user) 21c9140>)))
> In guix/ui.scm:
>   1734:12  0 (run-guix-command _ . _)
>
> guix/ui.scm:1734:12: In procedure run-guix-command:
> Throw to key `encoding-error' with args `("scm_to_stringn" "cannot convert wide string to output locale" 84 #f #f)'.

This package contains non-ASCII UTF-8-encoded file names.

I suppose the error here is because you’re daemon is missing its UTF-8

locales.

This could be because you upgraded the daemon but did not upgrade the

‘glibc-utf8-locales’ or ‘glibc-locales’ you installed as root, no?

HTH,

Ludo’.

Josh Holland wrote on 15 Oct 2019 11:20

Recipients:(name . Ludovic Courtès)(address . ludo@gnu.org)(address . 37662@debbugs.gnu.org)

Message-ID:877e55an15.fsf@inv.alid.pw

Hi Ludo',

Ludovic Courtès <ludo@gnu.org> writes:

Toggle quote (6 lines)

> I suppose the error here is because you’re daemon is missing its UTF-8

> locales.

> This could be because you upgraded the daemon but did not upgrade the

> ‘glibc-utf8-locales’ or ‘glibc-locales’ you installed as root, no?

It's possible - I rarely do anything with the root profile, and wasn't
even aware that I had to keep it up to date.  Should I have to `guix
pull` and `guix upgrade` it regularly, as well as my user profile?

--
Josh Holland

Arun Isaac wrote on 15 Oct 2019 12:50

Recipients:(address . 37662@debbugs.gnu.org)

Message-ID:cu7eezdn5zp.fsf@systemreboot.net

Josh Holland <josh@inv.alid.pw> writes:

Toggle quote (11 lines)> Ludovic Courtès <ludo@gnu.org> writes:
>> I suppose the error here is because you’re daemon is missing its UTF-8
>> locales.
>>
>> This could be because you upgraded the daemon but did not upgrade the
>> ‘glibc-utf8-locales’ or ‘glibc-locales’ you installed as root, no?
>
> It's possible - I rarely do anything with the root profile, and wasn't
> even aware that I had to keep it up to date.  Should I have to `guix
> pull` and `guix upgrade` it regularly, as well as my user profile?

I install glibc-locales as a system-wide package in my operating-system

configuration. Perhaps that's what Ludo meant to say.

Josh Holland wrote on 16 Oct 2019 10:21

Recipients:(name . Arun Isaac)(address . arunisaac@systemreboot.net)

Message-ID:87a7a0vc5m.fsf@inv.alid.pw

Hi Arun,

Arun Isaac <arunisaac@systemreboot.net> writes:

Toggle quote (3 lines)

> I install glibc-locales as a system-wide package in my operating-system

> configuration. Perhaps that's what Ludo meant to say.

I probably should have mentioned in my initial report that this is Guix

running on top of a foreign distro (Arch).

Josh Holland

Ludovic Courtès wrote on 16 Oct 2019 13:34

Recipients:(name . Josh Holland)(address . josh@inv.alid.pw)(address . 37662@debbugs.gnu.org)

Message-ID:87pniwig4f.fsf@gnu.org

Hi Josh,

Josh Holland <josh@inv.alid.pw> skribis:

Toggle quote (10 lines)> Ludovic Courtès <ludo@gnu.org> writes:
>> I suppose the error here is because you’re daemon is missing its UTF-8
>> locales.
>>
>> This could be because you upgraded the daemon but did not upgrade the
>> ‘glibc-utf8-locales’ or ‘glibc-locales’ you installed as root, no?
>
> It's possible - I rarely do anything with the root profile, and wasn't
> even aware that I had to keep it up to date.

In practice you rarely need to update it, but sometimes it’s nice to do.

Toggle quote (3 lines)

> Should I have to `guix pull` and `guix upgrade` it regularly, as well

> as my user profile?

‘guix pull’ alone updates the daemon and provides it with

‘glibc-utf8-locales’, which may or may not be enough for your purposes.

Could you run:

cat /proc/PID/environ | xargs -0 echo

where PID is the PID of ‘guix-daemon’ as shown by ‘systemctl status’?

TIA,

Ludo’.

Josh Holland wrote on 16 Oct 2019 15:25

Recipients:(name . Ludovic Courtès)(address . ludo@gnu.org)(address . 37662@debbugs.gnu.org)

Message-ID:878spkuy30.fsf@inv.alid.pw

Hi Ludovic,

Ludovic Courtès <ludo@gnu.org> writes:

Toggle quote (4 lines)

> cat /proc/PID/environ | xargs -0 echo

LANG=en_GB.UTF-8 PATH=/usr/local/sbin:/usr/local/bin:/usr/bin INVOCATION_ID=15155558aca749efa1593610e892c3a0 JOURNAL_STREAM=9:19872 GUIX_LOCPATH=/var/guix/profiles/per-user/root/guix-profile/lib/locale GUIX=/gnu/store/f2zvgl9zz13r6rp89y0jjfj9f4jk5h9s-guix-command GUIX_STATE_DIRECTORY=/var/guix GUIX_CONFIGURATION_DIRECTORY=/etc/guix NIX_STORE_DIR=/gnu/store

Josh Holland

Bengt Richter wrote on 16 Oct 2019 17:31

Recipients:(name . Josh Holland)(address . josh@inv.alid.pw)

Message-ID:20191017003140.GB3782@PhantoNv4ArchGx.localdomain

On +2019-10-16 23:25:55 +0100, Josh Holland wrote:

Toggle quote (14 lines)> 
> Hi Ludovic,
> 
> Ludovic Courtès <ludo@gnu.org> writes:
> >
> >   cat /proc/PID/environ | xargs -0 echo
> >
> 
> LANG=en_GB.UTF-8 PATH=/usr/local/sbin:/usr/local/bin:/usr/bin INVOCATION_ID=15155558aca749efa1593610e892c3a0 JOURNAL_STREAM=9:19872 GUIX_LOCPATH=/var/guix/profiles/per-user/root/guix-profile/lib/locale GUIX=/gnu/store/f2zvgl9zz13r6rp89y0jjfj9f4jk5h9s-guix-command GUIX_STATE_DIRECTORY=/var/guix GUIX_CONFIGURATION_DIRECTORY=/etc/guix NIX_STORE_DIR=/gnu/store
> 
> --
> Josh Holland
> 

Hi Ludo, Josh,

If you want something that looks like env output, this works for me:

(also easier reading)

cat /proc/PID/environ | sed -E 's:\x00:\n:g'

You knew that, I know, but some onlookers might not :)

BTW, if this is considered ill-mannered besserwisser kibitzing,

or OT-noise-injection, please advise, et je serais sage ;-)

Regards,

Bengt Richter

Ben Sturmfels wrote on 16 Oct 2019 22:07

Recipients:(address . 37662@debbugs.gnu.org)

Message-ID:611eb65b-6b21-3a03-2dc7-c3bebb7a6328@stumbles.id.au

On 16/10/19 06:50, Arun Isaac wrote:

Toggle quote (17 lines)> 
> Josh Holland <josh@inv.alid.pw> writes:
> 
>> Ludovic Courtès <ludo@gnu.org> writes:
>>> I suppose the error here is because you’re daemon is missing its UTF-8
>>> locales.
>>>
>>> This could be because you upgraded the daemon but did not upgrade the
>>> ‘glibc-utf8-locales’ or ‘glibc-locales’ you installed as root, no?
>>
>> It's possible - I rarely do anything with the root profile, and wasn't
>> even aware that I had to keep it up to date.  Should I have to `guix
>> pull` and `guix upgrade` it regularly, as well as my user profile?
> 
> I install glibc-locales as a system-wide package in my operating-system
> configuration. Perhaps that's what Ludo meant to say.

Hi Ludo, is it best to install glibc-locales or glibc-utf8-locales in

the operating system configuration as Arun suggests?

I hit the same issue doing a reconfigure on Guix System after not having

these locales either in user, root or system profiles (though I'm unsure

whether root and system are the same thing).

I had been ignoring the recent hints "Consider installing the

`glibc-utf8-locales' or `glibc-locales'..." because it wasn't clear why

this was useful to do.

Should these locales just be installed by default on Guix System? Or

maybe this is one of those issues that I hit because I hadn't upgraded

within a certain window of changes.

(For other non Guix experts like myself, I fixed my system by `guix

pull` as root, followed by `guix package --install glibc-utf8-locales

glibc-locales`, restarted guix daemon with `herd stop guix-daemon`,

checked to see if it was really stopped with `ps aux | grep

guix-daemon`, it wasn't so used `kill [the-process-id]`, started with

`herd start guix-daemon` and then the reconfigure worked.)

Cheers,

Ben

Attachment: signature.asc

Ludovic Courtès wrote on 17 Oct 2019 02:08

Recipients:(name . Josh Holland)(address . josh@inv.alid.pw)(address . 37662@debbugs.gnu.org)

Message-ID:87o8yfrb6v.fsf@gnu.org

Hi Josh,

Josh Holland <josh@inv.alid.pw> skribis:

Toggle quote (9 lines)

> Ludovic Courtès <ludo@gnu.org> writes:

>> cat /proc/PID/environ | xargs -0 echo

> LANG=en_GB.UTF-8 PATH=/usr/local/sbin:/usr/local/bin:/usr/bin

> INVOCATION_ID=15155558aca749efa1593610e892c3a0 JOURNAL_STREAM=9:19872

> GUIX_LOCPATH=/var/guix/profiles/per-user/root/guix-profile/lib/locale

[…]

Does

/var/guix/profiles/per-user/root/guix-profile/lib/locale/*/en_GB.UTF-8

exists?

If you installed ‘glibc-utf8-locales’ in root’s profile, it certainly

doesn’t:

Toggle snippet (5 lines)

$ ls $(guix build glibc-utf8-locales)/lib/locale/2.29

de_DE.utf8 el_GR.utf8 en_US.utf8 fr_FR.utf8 tr_TR.utf8

de_DE.UTF-8 el_GR.UTF-8 en_US.UTF-8 fr_FR.UTF-8 tr_TR.UTF-8

So I think you have to install the ‘glibc-locales’ package in root’s

profile:

guix install glibc-locales

Let me know if it helps!

Ludo’.

Ludovic Courtès wrote on 17 Oct 2019 02:13

Recipients:(name . Ben Sturmfels)(address . ben@stumbles.id.au)

Message-ID:87eezbrayx.fsf@gnu.org

Hi,

Ben Sturmfels <ben@stumbles.id.au> skribis:

Toggle quote (21 lines)> On 16/10/19 06:50, Arun Isaac wrote:
>> 
>> Josh Holland <josh@inv.alid.pw> writes:
>> 
>>> Ludovic Courtès <ludo@gnu.org> writes:
>>>> I suppose the error here is because you’re daemon is missing its UTF-8
>>>> locales.
>>>>
>>>> This could be because you upgraded the daemon but did not upgrade the
>>>> ‘glibc-utf8-locales’ or ‘glibc-locales’ you installed as root, no?
>>>
>>> It's possible - I rarely do anything with the root profile, and wasn't
>>> even aware that I had to keep it up to date.  Should I have to `guix
>>> pull` and `guix upgrade` it regularly, as well as my user profile?
>> 
>> I install glibc-locales as a system-wide package in my operating-system
>> configuration. Perhaps that's what Ludo meant to say.
>
> Hi Ludo, is it best to install glibc-locales or glibc-utf8-locales in
> the operating system configuration as Arun suggests?

It’s best to install none of these. :-)

On Guix System, the mechanism is more fine-grained: the admin declares

precisely the locales they want in the ‘locale’ and ‘locale-definitions’

fields, and only those get installed. See

https://guix.gnu.org/manual/devel/en/html_node/Locales.html.

Toggle quote (4 lines)

> I hit the same issue doing a reconfigure on Guix System after not having

> these locales either in user, root or system profiles (though I'm unsure

> whether root and system are the same thing).

This is probably due to the switch to glibc 2.29: your system now

provides locales for glibc 2.29 only, but if you have binaries linked

against 2.28, they need 2.28 locale data.

To do that, add ‘glibc-2.28’ to the ‘locale-libcs’ field:

https://guix.gnu.org/manual/devel/en/html_node/Locales.html#Locale-Data-Compatibility-Considerations.

(Normally ‘guix pull --news’ mentioned it when you upgraded.)

Perhaps on we should just add the current and previous glibc to

‘locale-libcs’ by default.

HTH!

Ludo’.

Josh Holland wrote on 17 Oct 2019 03:28

Recipients:(name . Ludovic Courtès)(address . ludo@gnu.org)(address . 37662@debbugs.gnu.org)

Message-ID:877e53vf6d.fsf@inv.alid.pw

Hi Ludo,

Ludovic Courtès <ludo@gnu.org> writes:

Toggle quote (4 lines)

> Does

> /var/guix/profiles/per-user/root/guix-profile/lib/locale/*/en_GB.UTF-8

> exists?

Seems so (see below).

Toggle quote (2 lines)

> guix install glibc-locales

This was already installed too:

--8<------------

[root@spica ~]# guix install glibc-locales

guile: warning: failed to install locale

hint: Consider installing the `glibc-utf8-locales' or `glibc-locales' package and defining

`GUIX_LOCPATH', along these lines:

guix package -i glibc-utf8-locales

export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"

See the "Application Setup" section in the manual, for more info.

The following package will be upgraded:

glibc-locales 2.29 -> 2.29 /gnu/store/03nvilh2x4z07dxv7h13gh986vvgpnsf-glibc-locales-2.29

nothing to be done

[root@spica ~]# ls /var/guix/profiles/per-user/root/guix-profile/lib/locale/*/en_GB.UTF-8

LC_ADDRESS LC_CTYPE LC_MEASUREMENT LC_MONETARY LC_NUMERIC LC_TELEPHONE

LC_COLLATE LC_IDENTIFICATION LC_MESSAGES LC_NAME LC_PAPER LC_TIME

--8<------------

Josh Holland

Ludovic Courtès wrote on 17 Oct 2019 05:05

Recipients:(name . Josh Holland)(address . josh@inv.alid.pw)(address . 37662@debbugs.gnu.org)

Message-ID:87mudzpog5.fsf@gnu.org

Hi,

Josh Holland <josh@inv.alid.pw> skribis:

Toggle quote (4 lines)

> [root@spica ~]# guix install glibc-locales

> guile: warning: failed to install locale

> hint: Consider installing the `glibc-utf8-locales' or `glibc-locales' package and defining

Note that this tells you that this ‘guix’ command is probably linked

against 2.28; this is fixed by making sure you’re running the latest

‘guix’ produced by ‘guix pull’, for instance with:

~root/.config/guix/current/bin/guix install glibc-locales

(IOW, it’s not the same problem as substitution problem we were

initially discussing.)

Ludo’.

Ludovic Courtès wrote on 21 Oct 2019 05:34

control message for bug #37662

Recipients:(address . control@debbugs.gnu.org)

Message-ID:877e4y2s6v.fsf@gnu.org

tags 37662 fixed
close 37662 
quit

Your comment

This issue is archived.

To comment on this conversation send an email to 37662@patchwise.org

To respond to this issue using the mumi CLI, first switch to it

mumi current 37662

Then, you may apply the latest patchset in this issue (with sign off)

mumi am -- -s

Or, compose a reply to this issue

mumi compose

Or, send patches to this issue

mumi send-email *.patch

is:open	open issues
is:done	closed issues
submitter:<who>	search issue submitter
author:<who>	search by message author
date:yesterday..now	search by issue date
mdate:3m..2d	search by message date